Português-Portuguese
Português-Portuguese
Manteiga espessa e cremosa para definição de cachos e modelagem das curvaturas dos cachos.
|
Phase |
Trade name / Supplier |
INCI name |
% Wt. |
|
A |
Dimethicone |
9.0 |
|
|
Olive Oil |
Olive Oil |
3.0 |
|
|
Cetiol SB 45 / BASF |
Butyrospermum Parkii (Shea) Butter |
3.0 |
|
|
C30-45 Alkyldimethylsilyl Polypropylsilsesquioxane |
1.0 |
||
|
Stearyl Dimethicone (and) Octadecene |
3.0 |
||
|
Dimethicone (and) PEG / PPG-18/18 Dimethicone |
5.0 |
||
|
HydroxySHIELD™ Polymer / Dow |
Bis-Diisopropanolamino-PG-Propyl Disiloxane / Bis-Vinyl Dimethicone Copolymer |
2.0 |
|
|
B |
Sodium Chloride |
Sodium Chloride |
1.0 |
|
Deionized Water |
Aqua |
65.3 |
|
|
Bis-PEG-18 Methyl Ether Dimethyl Silane |
2.0 |
||
|
Glycerin |
Glycerin |
5.0 |
|
|
C |
Euxyl PE-9010 / Ashland |
Phenoxyethanol (and) Ethylhexylglycerin |
0.5 |
|
D |
Cactus & Aloe Water / Givaudan |
Fragrance |
0.2 |
Disclaimer: Any variation in the formulation may cause performance to change.
Add phase A to beaker and heat to 75°C using a water bath. Mix until melted and homogeneous.
Add phase B to a separate beaker. Mix until DOWSIL™ 2511 Cosmetic Wax and salt are dissolved. Can heat to 40°C to speed dissolution if desired.
Cool phase A to 50°C, keep mixing.
Very slowly, add phase B to phase A (keeping at 50°C) while mixing at high shear (high RPM and high shear mixing blades).
Once phase B addition is complete, add phase C and D one at a time, mixing at least two minutes under high shear for each.
Homogenization will aid with stability but will need to be done while formula is still >/= 40°C. Stop mixing, pour down while still warm. Formula will thicken as it cools.
